Colorist Secrets™ Shine Gloss™ Appl. Instructions

Get Ready
Step 1
Be sure your hair is dry and detangled
Step 2
Put on gloves provided in the kit. Drape towel over shoulders to protect clothing.
Step 3
Twist off the tip of the Developer Crème bottle (1) before beginning. Remove cap from bottle.
Step 4
Pierce the opening of Clear Shine Gloss (2) tube with the inverted cap and squeeze entire contents into the Developer bottle (1) and recap the bottle.
Step 5
Place your gloved finger over open tip, point away from your face and shake thoroughly until mixture is totally blended
Caution: Never leave the tip of the applicator bottle unopened after mixing. Container may burst.

Apply Shine Gloss
Step 1 Immediately after mixing, squeeze mixture from the bottle (1) onto dry, detangled hair beginning in front. Work mixture gently through hair beginning in front. Work mixture gently through hair, from roots to ends.
Step 2
Use as little or as much mixture as needed to saturate hair completely.
Step 3
If mixture gets on skin, rinse off with cool water.
Step 4
Discard any unused mixture.

Time
Shine Gloss infuses hair with brilliant shine in only 10 minutes

Rinse & Condition
Step 1
Keeping gloves on, rinse hair gently with lukewarm water until water runs clear. No need to shampoo.
Step 2
Apply the Hi-Moisture Conditioner (3) to hair. Work through and let penetrate for two minutes. Rinse thoroughly with warm water until water runs clear.